Fiber Finder
Don't know where to begin? You came to the right place.
Nycon's Fiber Finder search tools to help you create the right Fiber Reinforced Concrete for your job. Here's how they work...
Narrow your choices:
Use the filters to the left of the products to narrow your choices down. |
Compare Side-by-side:
|
Contact Us for a Quote
Fiber Finder Products
Control Fiber
Control products by Nycon are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). Control products primary advantages include controlling plastic shrinkage, thermal, and craze cracking in concrete. These fibers are packaged for retail sale and pre-measured ready-to-mix with a 50lb. bag of concrete.
Multimesh
Multimesh by Nycon are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Multimesh are controlling plastic shrinkage,thermal, and craze cracking in concrete.
Procon-M
Procon-M by Nycon are ¾” (19mm) mono-filament Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Procon-M are shrinkage and thermal crack control. With a mono-filament diameter of 38 microns (0.038mm) this product provides the highest quality finish of the Polypropylene family of fibers.
RECS100
RECS100 by Nycon are 20 denier, mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). The primary benefits of RECS100 are lightweight flexural strength as well as increased impact and abrasion resistance. They are a preferred reinforcement solution for applications under a 1/2 inch thick. RECS100 fibers can replace glass fibers in GFRC at a third of the weight of glass. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (180 ksi (1200 MPa)) and flexural (3600 ksi (25 GPa)) strength.
RECS15
RECS15 by Nycon are 8 denier, ductile mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). The primary benefits of RECS15 are an increase in the flexibility and toughness of concrete. These fibers lend their 5700 ksi (40 GPa) of flexural strength to your concrete allowing it to bend where normal concrete would break. RECS15 is coated to aid in dispersion and increase strain hardening. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RFS400
RFS400 by Nycon are PVA fibers (Polyvinyl Alcohol) with a denier of 40 for use in creating fiber-reinforced concrete (FRC). These fibers are designed for the purpose of adding flexural strength to concrete and improving impact and abrasion resistance. RFS400 also provides shrinkage and temperature crack control. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RSC15
RSC15 by Nycon are 8 denier, ductile mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). These fibers are used primarily to increase the flexibility and toughness of concrete. These fibers lend their 4200 ksi (29 GPa) of flexural strength to your concrete allowing it to bend where normal concrete would break. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of it's tensile strength (210 ksi (1400 MPa) ).
SF Type-I N
SF Type-I N “Needles” fiber products by Nycon are 0.2 mm diameter x 13mm mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers are designed for use in concrete products as a primary reinforcement. SF-Type-I Needles are coated with copper to resist corrosion.
Available in bulk quantities only.
SF-B
SF-B fibers by Nycon are Type V steel fibers pre-blended with Multimesh synthetic fibers for use in creating fiber-reinforced concrete (FRC). Nycon SF-B fibers provide a superior, high performance concrete that is more resistant to cracking and impact and abrasion damage.
