Not Available Online. Contact Us for a Quote.
SSF TYPE I steel fibers by Nycon can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of SSF TYPE I steel fibers. The addition of SSF TYPE I steel fibers at the normal recommended dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.
SSF Type-I “Hooked End” steel fiber products by Nycon are cold-drawn mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers specifically designed for use in concrete products for the purpose of primary reinforcement and are available in loose or collated versions. These fibers are stainless steel to resist corrosion and their hooked end configuration allows for a predictable failure point in their unbending.
SSF Type-I HE
|Tensile Strength||165 ksi (1100 MPa)|
|Flexural Strength||29,000 ksi (203 GPa)|
|Filament Diameter||0.02” (0.5 mm) / 0.035” (0.9 mm)|
|Available Lengths||1" (25 mm), 1.5" (38 mm)|