Fiber Finder

Don't know where to begin? You came to the right place.
Nycon's Fiber Finder search tools to help you create the right Fiber Reinforced Concrete for your job. Here's how they work...
Narrow your choices:
Use the filters to the left of the products to narrow your choices down. |
Compare Side-by-side:
|
Contact Us for a Quote
Fiber Finder Products 
AR-DM
AR-DM by Nycon are mono-filament alkali resistant glass fibers for use in creating fiber-reinforced concrete (FRC). This product is made for Dry Mix applications which generally have small volume placement and/or limited vehicular access.
AR-HD
AR-HD by Nycon are mono-filament alkali resistant glass fibers for use in creating fiber-reinforced concrete (FRC). This product is made to have a High Dispersion rate by reducing the amount of sizing on the fibers.
AR-S
AR-S by Nycon is glass spool roving for use in creating fiber-reinforced concrete (FRC). AR-S is typically used in GFRC Chopper guns and Cementex trucks for fiber-on-demand applications.
Control Fiber
Control products by Nycon are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). Control products primary advantages include controlling plastic shrinkage, thermal, and craze cracking in concrete. These fibers are packaged for retail sale and pre-measured ready-to-mix with a 50lb. bag of concrete.
Multimesh
Multimesh by Nycon are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Multimesh are controlling plastic shrinkage,thermal, and craze cracking in concrete.
Procon-F
Procon-F by Nycon are macro fibrillated Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Procon-F are shrinkage and thermal crack control.
Procon-M
Procon-M by Nycon are ¾” (19mm) mono-filament Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Procon-M are shrinkage and thermal crack control. With a mono-filament diameter of 38 microns (0.038mm) this product provides the highest quality finish of the Polypropylene family of fibers.
RC
RC by Nycon are 2 denier, ultra-fine mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of RC are controlling plastic shrinkage,thermal, and craze cracking in concrete.
RECS100
RECS100 by Nycon are 20 denier, mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). The primary benefits of RECS100 are lightweight flexural strength as well as increased impact and abrasion resistance. They are a preferred reinforcement solution for applications under a 1/2 inch thick. RECS100 fibers can replace glass fibers in GFRC at a third of the weight of glass. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (180 ksi (1200 MPa)) and flexural (3600 ksi (25 GPa)) strength.
RECS15
RECS15 by Nycon are 8 denier, ductile mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). The primary benefits of RECS15 are an increase in the flexibility and toughness of concrete. These fibers lend their 5700 ksi (40 GPa) of flexural strength to your concrete allowing it to bend where normal concrete would break. RECS15 is coated to aid in dispersion and increase strain hardening. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RF4000
RF4000 by Nycon are 130 denier, mono-filament macro PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). The primary benefits of RF4000 are light-weight flexural strength and increased impact and abrasion resistance. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of it's tensile strength (120 ksi (800 MPa) ).
RFS400
RFS400 by Nycon are PVA fibers (Polyvinyl Alcohol) with a denier of 40 for use in creating fiber-reinforced concrete (FRC). These fibers are designed for the purpose of adding flexural strength to concrete and improving impact and abrasion resistance. RFS400 also provides shrinkage and temperature crack control. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RMS702
RMS702 by Nycon are ultra fine PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). These fibers are commonly used in very thin applications where moisture and ductility are important. RECS7's small denier means your concrete can contain more fibers per in3. At 5 Denier (24 microns) filament diameter, it works very well with material flow allowing for ease in extrusion. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RSC15
RSC15 by Nycon are 8 denier, ductile mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). These fibers are used primarily to increase the flexibility and toughness of concrete. These fibers lend their 4200 ksi (29 GPa) of flexural strength to your concrete allowing it to bend where normal concrete would break. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of it's tensile strength (210 ksi (1400 MPa) ).
SF Type-I N
SF Type-I N “Needles” fiber products by Nycon are 0.2 mm diameter x 13mm mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers are designed for use in concrete products as a primary reinforcement. SF-Type-I Needles are coated with copper to resist corrosion.
Available in bulk quantities only.
SF Type-V
SF Type-V by Nycon are drawn, continuously deformed steel fibers for use in creating fiber-reinforced concrete (FRC) and shotcrete. This fiber product can replace welded wire mesh and is our most economical steel fiber solution.
SF-B
SF-B fibers by Nycon are Type V steel fibers pre-blended with Multimesh synthetic fibers for use in creating fiber-reinforced concrete (FRC). Nycon SF-B fibers provide a superior, high performance concrete that is more resistant to cracking and impact and abrasion damage.
SSF Type V
SSF Type V by Nycon are drawn, continuously deformed stainless steel fibers for use in creating fiber-reinforced concrete (FRC) and shotcrete.This fiber product can replace welded wire mesh and bolsters impact and abrasion resistance by diffusing the energy of those forces throughout the whole of the concrete. SSF Type V is Stainless Steel to resist corrosion.
SSF Type-I HE
SSF Type-I “Hooked End” steel fiber products by Nycon are cold-drawn mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers specifically designed for use in concrete products for the purpose of primary reinforcement and are available in loose or collated versions. These fibers are stainless steel to resist corrosion and their hooked end configuration allows for a predictable failure point in their unbending.
TUFF-MIX
TUFF-MIX™ creates ultra-high durability concrete for heavy impact and abrasion applications such as scrap yard slabs. This mix includes the additive polyvinyl alcohol (PVA) that develops a molecular bond to the concrete, turning it into a composite that is more durable than plain, high-strength concrete. This added durability translates into a lower life-cycle cost and less maintenance. TUFF-MIX™ works because it slows down concrete damage by reducing the destruction caused by impact and abrasion. TUFF-MIX™ is available through our network of certified concrete suppliers.
XL
XL by Nycon are high-flexural macro fibrillated Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of XL are shrinkage crack and thermal crack control as well as an increase in tensile and flexural strength enough to replace welded wire mesh.
XL-100
XL-100 by Nycon are high-tensile macro mono-filament Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of XL-100 are shrinkage crack and thermal crack control as well as increased tensile and flexural strength enough to replace welded wire mesh.
XL-200
XL-200 by Nycon are macro fibrillated Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of XL-200 are shrinkage crack and thermal crack control as well as increased tensile and flexural strength enough to replace welded wire mesh.