The Benefits of Steel Fibers™ by Nycon
increase the limits of your concrete with tensile strength ranges of 100 - 285 ksi
reinforce at a multitude of angles as opposed to only the few covered by welded wire mesh and rebar
reduce the damage done by impact and abrasion by diffusing the energy of those forces throughout the whole of the concrete.
increase post-crack flexural strength (29,000 ksi), supporting a load even after a crack has occurred.
At NYCON we offer SSF Type-I HE, SF Type-I N, SF-B, SSF Type V, and SF Type-V steel fiber products.
Contact Us for a Quote
Steel Fibers Products
SSF Type-I “Hooked End” steel fiber products by Nycon are cold-drawn mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers specifically designed for use in concrete products for the purpose of primary reinforcement and are available in loose or collated versions. These fibers are stainless steel to resist corrosion and their hooked end configuration allows for a predictable failure point in their unbending.
SF-B fibers by Nycon are Type V steel fibers pre-blended with Multimesh synthetic fibers for use in creating fiber-reinforced concrete (FRC). Nycon SF-B fibers provide a superior, high performance concrete that is more resistant to cracking and impact and abrasion damage.
SSF Type V by Nycon are drawn, continuously deformed stainless steel fibers for use in creating fiber-reinforced concrete (FRC) and shotcrete.This fiber product can replace welded wire mesh and bolsters impact and abrasion resistance by diffusing the energy of those forces throughout the whole of the concrete. SSF Type V is Stainless Steel to resist corrosion.