Control Fiber
Control Fiber
Control Fiber
Control Fiber

Control Fiber


Size: 150 x 3 OZ Packs

Control products are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). Control products primary advantages include controlling plastic shrinkage, thermal, and craze cracking in concrete. These fibers are packaged for retail sale and pre-measured ready-to-mix with a 50lb. bag of concrete.

Meets the requirements of ASTM C-1116, Section 4.1.3 and AC-32 at 1.0 lb (0.45 kg) per CY. Control has completed ICC-ES evaluation as reported in ER 5460.

Bulk pricing available, contact us for a quote.

Configuration Monofilament
Tensile Strength 44 ksi (300 MPa)
Flexural Strength 2.8 ksi (400 MPa)
Filament Diameter 0.038 mm (38 Microns)
Available Lengths N/A
Aspect-Ratio 157.89,342.10, 500
Melting Point 435o F (225o C)
Water Absorbtion 3% by Weight
Color Translucent
Elongation 13~25
ZrO2 Content NA

One 3-ounce (.084kg) bag of Control Reinforcing Fibers per 50lb (22.68kg) cement or 400lbs (181.44kg) of concrete mix.

  1. Mix dry ingredients with water according to mix requirements.
  2. Add the proper dose of Nycon CONTROL Fibers.
  3. Mix for approximately 4 minutes to allow dispersion of fibers.

Stucco, Residential Slab, Grouts\, Mortar, Cement

You may also like