ProCon-M by Nycon can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of ProCon-M. The addition of ProCon-M at the normal recommended dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.
Procon-M by Nycon are mono-filament Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Procon-M are shrinkage and thermal crack control. With a mono-filament diameter of 38 microns (0.038mm) this product provides the highest quality finish of the Polypropylene family of fibers.
Commercial Slab on Grade
|Tensile Strength||22 ksi (170 MPa)|
|Flexural Strength||300 ksi (2.1 GPa)|
|Filament Diameter||8 Denier (38 μm, .038 mm )|
|Available Lengths||0.75" (19 mm)|
|Melting Point||320o F (160o C)|