SF Type-V

SF Type-V


Size: 55 lbs Carton

SF Type-V are drawn, continuously deformed steel fibers for use in creating fiber-reinforced concrete (FRC) and shotcrete. This fiber product can replace welded wire mesh and is our most economical steel fiber solution.

Meet the requirements of ASTM A820.

Bulk pricing available, contact us for a quote.

Configuration Continously Deformed
Tensile Strength 100 ksi (690 MPa)
Flexural Strength 29,000 ksi (203 GPa)
Filament Diameter 0.046" (1.18 mm)
Available Lengths 1.5" (38 mm)
Aspect-Ratio 32.2
Melting Point 2760°F(1516°C)
Water Absorbtion Nil
Color Grey
Elongation 3~4
ZrO2 Content NA

SF TYPE V steel fibers can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of SF TYPE V steel fibers. The addition of SF TYPE V steel fibers at the normal recommended dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.

Industrial Slab on Grade, Shotcrete, Composite Metal Deck, Precast, Refractory Precast, Welded Wire Mesh Replacement


You may also like