Fiber Finder
Don't know where to begin? You came to the right place.
Nycon's Fiber Finder search tools to help you create the right Fiber Reinforced Concrete for your job. Here's how they work...
Narrow your choices:
Use the filters to the left of the products to narrow your choices down. |
Compare Side-by-side:
|
Contact Us for a Quote
Fiber Finder Products
AR-DM
AR-DM by Nycon are mono-filament alkali resistant glass fibers for use in creating fiber-reinforced concrete (FRC). This product is made for Dry Mix applications which generally have small volume placement and/or limited vehicular access.
AR-HD
AR-HD by Nycon are mono-filament alkali resistant glass fibers for use in creating fiber-reinforced concrete (FRC). This product is made to have a High Dispersion rate by reducing the amount of sizing on the fibers.
RECS15
RECS15 by Nycon are 8 denier, ductile mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). The primary benefits of RECS15 are an increase in the flexibility and toughness of concrete. These fibers lend their 5700 ksi (40 GPa) of flexural strength to your concrete allowing it to bend where normal concrete would break. RECS15 is coated to aid in dispersion and increase strain hardening. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RMS702
RMS702 by Nycon are ultra fine PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). These fibers are commonly used in very thin applications where moisture and ductility are important. RECS7's small denier means your concrete can contain more fibers per in3. At 5 Denier (24 microns) filament diameter, it works very well with material flow allowing for ease in extrusion. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi (1600 MPa) ) and flexural strength.
RSC15
RSC15 by Nycon are 8 denier, ductile mono-filament PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). These fibers are used primarily to increase the flexibility and toughness of concrete. These fibers lend their 4200 ksi (29 GPa) of flexural strength to your concrete allowing it to bend where normal concrete would break. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of it's tensile strength (210 ksi (1400 MPa) ).
SF Type-I N
SF Type-I N “Needles” fiber products by Nycon are 0.2 mm diameter x 13mm mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers are designed for use in concrete products as a primary reinforcement. SF-Type-I Needles are coated with copper to resist corrosion.
Available in bulk quantities only.
