AR-S
AR-S

AR-S

CALL OR EMAIL US FOR A QUOTE

AR-S is glass spool roving for use in creating fiber-reinforced concrete (FRC). AR-S is typically used in GFRC Chopper guns and Cementex trucks for fiber-on-demand applications.

Meets the requirements of ASTM C-1116, Section 4.1.3 and AC-32 at 1lb (0.45 kg) per CY.

Bulk pricing available, contact us for a quote.

Configuration Spool Roving
Tensile Strength 300 ksi (2000 MPa)
Flexural Strength 11,000 ksi (77 GPa)
Filament Diameter 0.00005” (0.01 mm)
Available Lengths N/A
Aspect-Ratio 1300
Melting Point 2075o F (1121o C)
Water Absorbtion <1%
Color White
Elongation 0~4
ZrO2 Content 19% by Weight

AR-S by Nycon can be chopped as needed and added directly to the dry or wet mixing system during or after the batching of the ingredients. The addition of chopped AR-S at the normal recommended dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.

Architectural Precast, Stucco, Shotcrete, Welded Wire Mesh Replacement


You may also like