XL-100 by Nycon can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of XL-100. The addition of XL-100 at the normal recommended dosage rate (3-10 lb/cy) does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.
XL-100 by Nycon are high-tensile macro mono-filament Polypropylene fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of XL-100 are shrinkage crack and thermal crack control as well as increased tensile and flexural strength enough to replace welded wire mesh.
Industrial Slab on Grade
Composite Metal Deck
Welded Wire Mesh Replacement
|Tensile Strength||100 ksi (690 MPa)|
|Flexural Strength||1305 ksi (9.0 GPa)|
|Filament Diameter||.5 mm (500 microns)|
|Available Lengths||1" (25 mm), 1.5" (38 mm)|
|Melting Point||320o F (160o C)|