RMS702

RMS702

CALL OR EMAIL US FOR A QUOTE

Size: Carton of (30) 1 lb. bags

RMS702 by Nycon are ultra fine PVA fibers (Polyvinyl Alcohol) for use in creating fiber-reinforced concrete (FRC). These fibers are commonly used in very thin applications where moisture and ductility are important. RECS7's small denier means your concrete can contain more fibers per in3. At 5 Denier (24 microns) filament diameter, it works very well with material flow allowing for ease in extrusion. These PVA fibers bond on a molecular level (hydrogen bonding) within concrete, creating a multi-dimensional network of tensile (240 ksi [1600 MPa] ) and flexural strength.

Meets the requirements of ASTM C-1116, Section 4.1.3 and AC-32 at 1.0 lb (0.45 kg) per CY.

Bulk pricing available, contact us for a quote.

Configuration Monofilament Bundle
Apparent Fineness 7.0 dtex ± 1.5
Filament Diameter 6 Denier (27 Microns)
Fiber Length 0.24” (6mm ± 0.3)
Specific Gravity 1.3
Tensile Strength 260 ksi (1794 MPa ± 325) 13.8 cN/dtex ± 2.5
Melting Point Over 392° F (200° C)
Elongation at Break 5.8% ± 1.5
Color White
Alkali Resistance Excellent
Concrete Surface Not Fuzzy
Corrosion Resistance Excellent

RMS702 can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of PVA.

The addition of RMS702 at the normal or high dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired. PVA reinforcing fiber acts with a molecular bond in the concrete with a multi-dimensional fiber network. It does not affect curing process chemically.

Grouts, Composite Roofing, Cement Board


You may also like