SSF Type V
- Description
- Specifications
- Instructions
- Applications
- Documentation
Size: 40 lbs Carton
SSF Type V are drawn, continuously deformed stainless steel fibers for use in creating fiber-reinforced concrete (FRC) and shotcrete. This fiber product can replace welded wire mesh and bolsters impact and abrasion resistance by diffusing the energy of those forces throughout the whole of the concrete. SSF Type V is Stainless Steel to resist corrosion.
Meet the requirements of ASTM A820.
Bulk pricing available, contact us for a quote.
| Configuration | Continously Deformed |
|---|---|
| Tensile Strength | 150 ksi (1030 MPa) |
| Flexural Strength | 29,000 ksi (203 GPa) |
| Filament Diameter | 0.046" (1.18 mm) |
| Available Lengths | 1.5" (38 mm), 2" (50 mm) |
| Aspect-Ratio | 32.20, 42.37 |
| Melting Point | 2760°F(1516°C) |
| Water Absorbtion | Nil |
| Color | Gray |
| Elongation | 3~4 |
| ZrO2 Content | NA |
SSF Type V steel fibers can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of SSF Type V steel fibers. The addition of SSF Type V steel fibers at the normal recommended dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.
Bank Vaults, Tunnel Lining, Industrial Slab on Grade, Composite Metal Deck, Precast, Welded Wire Mesh Replacement, Rebar Replacement