SF Type-I N

SF Type-I N

CALL OR EMAIL US FOR A QUOTE

SF Type-I N “Needles” fiber products by Nycon are 0.2 mm diameter x 13mm mono-filament steel fibers for use in creating fiber-reinforced concrete (FRC). These fibers are designed for use in concrete products as a primary reinforcement. SF-Type-I Needles are coated with copper to resist corrosion.

Meet the requirements of ASTM A820.

Available in bulk quantities only. Reach out for estimate.

Configuration Monofilament
Tensile Strength 285 ksi (1900 MPa)
Flexural Strength 29,000 ksi (203 GPa)
Filament Diameter 0.008" (0.2 mm)
Available Lengths 0.5" (13 mm)
Aspect-Ratio 65
Melting Point 2760°F(1516°C)
Water Absorbtion Nil
Color Grey
Elongation 3~4
ZrO2 Content NA

SF TYPE I steel fibers can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of-SF TYPE I steel fibers. The addition of SF TYPE I steel fibers at the normal recommended dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired.

Bank Vaults, Refractory Precast


You may also like